TILE ADHESIVE
AAC BLOCK Adhesive
DESCRIPTION
AAC Block Adhesive is a factory prepared blend of carefully selected raw materials, Portland cement and graded aggregates and polymers. Designed for use with water to produce high strength thixotropic mortar, for laying Aerated Light weight concrete, Fly ash bricks, cement hollow blocks, Cellular concrete blocks or smoothing over the block work surface in layers of up to 12mm thickness, that meet and exceed the requirements of National and International Standards.
APPLICATION
For interior and exterior use for preparing thin bed adhesive for AAC, ALC and cellular concrete blocks.
TECHNICAL DATA
Applicable Standard:
Conforms to ANSI A118.1 & ANSI A118.4-1999
Performance Properties:
AAC BLOCK ADHESIVE mixed with water
| Test | Results |
|---|---|
| Compressive strength | >5 MPa |
| Flexural Strength | >3 MPa |
| Tensile Adhesion strength | >1MPa |
ADVANTAGE
- High Strength
- No curing required after block work is done.
- Flexible, shock & impact resistant
- Improved adhesion between two blocks
- improved bond strength, compressive & tensile strength
- Thin jointing with high adhesion to contribute to load bearing capacity of masonry
- easy to use
- Long working time
- Fast & economical
Suitable Substrates:
- Concrete Blocks
- Cement Mortar Blocks/Bricks
- Concrete hollow blocks
- Aerated Light weight blocks
- Cellular concrete blocks
- Fly Ash Bricks
PACKAGING
- Packaging : 20 Kg & 50 kg bag
- Colour: Grey
- Coverage:
Coverage is based on smoothness and evenness of the substrate, size of blocks used and the thickness of mortar used. A general guide line for coverage of mortar is given when used with 30% Water is added to powder
Shelf Life:
Factory sealed bags of this product are guaranteed to be of first quality for one (1) year* if stored off the ground in a dry area, at 21 C and 50% RH.
*High humidity will reduce the shelf life of bagged product
Limitations:
- Adhesives/mastics, mortars and grouts for ceramic tile, pavers, brick and stone are not replacements for waterproof membranes.
Cautions
- During cold weather, protect finished work from use until fully cured.
- Contains Portland cement and silica sand. May irritate eyes and skin. Avoid contact with eyes or prolonged contact with skin. In case of contact, flush thoroughly with water.
- Do not take internally. Silica sand may cause cancer or serious lung problems. Avoid breathing dust. Wear a respirator in dusty areas.
- Keep out of reach of children